1 / 4
2020 and 2040 SD Card Holder (QTY 3) — zdjęcie 1
1 / 4

2020 and 2040 SD Card Holder (QTY 3)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use it, Spread it, Remix it! This 2020 Attachment holds 3 SD Cards. You will need two M5x10 button head screws Amazon…

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
95
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Use it, Spread it, Remix it!

This 2020 Attachment holds 3 SD Cards.

You will need two M5x10 button head screws Amazon Link for screws in US and two Amazon Link for nuts in US

The SD cards sits halfway into the part to allow for easy access.

Print Settings

Initial Layer Height: 0.15mm

Layer Height: 0.2mm

Line Width: 0.35mm

Wall Thickness: 1mm

Wall Line Count: 3

Infill: 10% Gyroid

Plate Adhesion: Brim (8mm brim width)

Category: 3D Printer Accessories

Tagi