1 / 2
Skadis T-Nut Tape Measure Belt Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the tape measure by the belt clip to Skadis pegboard, using T-nut mount system.
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 340
- Wydruki
- 12
- Wyświetlenia
- 1328
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 12) (Komentarze: 13)Remiksy (2)Kolekcje (114)Powiązane
Holds the tape measure by the belt clip. The clip can be up to about 1 inch / 25mm wide.
Prints in provided orientation without support.
Designed for M3 screw, with 7mm counterbore for screw head. I used these M3 printed thread T-Nuts: Skadis T-nut mounting system, threaded for M3 or UNC #5-40 screws By ORM
You should also be able use the M2/M2.5 T-Nuts from here: Skadis T-Nuts Mounting System for Ikea Skadis Pegboards by 6d6178
You might want to use a suitable washer in that case.