Bambu Lab P1 Series Cable Opening Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover for the cable opening on the front panel of the Bambu Lab P1 Series
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 827
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I have designed a cover for the Bambu Lab P1 Series front cover cable opening. I wanted to close up the space around the cable to prevent dust from coming in and to (even better) isolate the casing. Not sure, if the latter matters that much, though.
I printed the model in TPU, but I guess PLA would also work. The opening is for the cable that came with the ESP32-2432S028R display. After I added the touch screen to the printer, it bothered me a bit, that the cable is loose inside the opening, so I wanted to close it off. It should be a tight fit, but you are still able to pull and push the cable. (If not, just take out the cover)
Prints without supports. Layer height at 0.3 for faster print, 0.2 for tighter fit.
In case you don't have the touch display, but just want to close off the opening, I included a model file without the cutout.
Update 27 Dec. 23: Added a short version for people who don't need to pull it out often. You can still push it out from the bottom or just pull it out with the cable.