Tall Feet for Jonsbo D31/D41 Series of Computer Cases.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a drop-in replacement foot for the Jonsbo D31 and D41 computer cases that is twice as tall as the original.
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 509
- Wydruki
- 0
- Wyświetlenia
- 2569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a taller version of the foot from the Jonsbo D31/D41 series of ATX computer cases. The purpose is to increase the gap under the case and improve airflow into the lower intake fans. The gap with the tall feet is now approximately 3cm which is about double that of the original feet.
There is a sacrificial single 0.2mm layer bridge in the counterbored hole so that supports aren't necessary. The screw easily punches through when attaching the foot to the case.
The example was printed in Prusa Galaxy Silver PLA with a 0.4mm nozzle and the 0.2mm Structural profile.