Liczymy pasujące modele…
Thanks to LoserKid418 for adding access to the OnShape object for his original design! I'm in the process of learning Fusion 360, so I used his original object as a reference to remake it in F360. This is the first thing I've created in…
Description: Build your own high-precision indoor air quality monitor! This project uses the industry-standard Sensirion SCD41 sensor paired with an ESP32 to track CO2 levels, temperature, and humidity. It is fully integrated with Home…
This is a taller version of the foot from the Jonsbo D31/D41 series of ATX computer cases. The purpose is to increase the gap under the case and improve airflow into the lower intake fans. The gap with the tall feet is now approximately…
Holder for XY-MOS D4184 Power MOSFET breakout module. Snap-in, no screws are needed to hold the module in place, but holes for small screws are included for extra security. I used 1.8*5.6mm sheet screws. Print Settings Printer Brand:…
how to build All sensors are from Sensirion. They all use I²C bus. The two little ones can withstand 3.3V and 5V, the PM sensor needs 5V. I choose to operate the little ones at 3.3V to minimize their heating. The SCL and SDA wires can be…
This is my interpretation in Gauge 1 of a Minden Deutz MD41 LEICHT bogie. These bogies were used on several DB carriages like the "Silberlingen" and 4 axle "Umbauwagen". https://de.wikipedia.org/wiki/Drehgestell_Bauart_Minden-Deutz Space…
Remixed case for XY-MOS Power Mosfet
This tensile specimen can be printing using paste extrusion 3D printer for Rubber standard materials. Very useful in analyzing mechanical properties of 3D printed rubber specimens.
Simple case for the SCD41 sensor. My specific came from Aliexpress and seems to be a Adafruit clone.
I recommend gluing the clips into the holes. This screen mount is made for the JONSBO D41 PC Case. The case has a built-in, detachable screen, allowing me to have a video or reference model up without having to take up more desk space…
Can 3d print or plasma cut from steel
The original front/side panel retention clips on the Jonsbo D41 computer case are lousy and brittle. I decided to make these when I accidentally broke 3 of the original clips when attempting to put my side panels back on. I was able to…
This is a simple case for the SCD41 sensor breakout form Pimoroni. Only the top of the sensor is exposed which minimizes the dead volume and therefore ensures quick sensor response. The shield in front of the sensor protects it from…
If printed from PLA, spring can hold on laptops with screen width 280 - 320mm. If printed from PETG what is also filament I recommend, it can be more. Screen thickness dimension is set on 10mm, but if you want to change it, open f3z file…
Closable case for SCD41 LaskaKit CO2 Sensor. Ready for uSup connection.
Tisk 2 částí. V modelu jsou připraveny oblasti pro větrací mřížku. Stačí nastavit 0 perimetrů a nechat vyslicovat jen výplň. Použil jsem výplň gyroid. Použity šroubky do plastu 2,2x8 mm.
I created a cover for my Amcrest Ad410 doorbell to make it harder to steal. It is made for 15 degree mount, and I think it can be mirrored to face the other side if needed.
Držák určený na napaječky pro hlodavce značky De Luxe. tato značka je běžně dostupná ve zverimexech a internetových obchodech. Napaječky De Luxe jsou vyráběny v rozmezí 150-1,1L. V rozmezí 150-600ml je spodní díl shodný. Napajčku lze…
příchytka PCB s CO2 čidlem z Laskakit do krabičky IKEA VINDRIKTNING https://www.laskakit.cz/laskakit-scd41-senzor-co2--teploty-a-vlhkosti-vzduchu/ https://www.laskakit.cz/laskakit-esp-vindriktning-esp-32-i2c/
FR Boitier en quatre parties pour une alimentation de serveur : HP HSTNS-PD41 DPS-800AB-11 A 723600-001 un bloc troué pour un poser un interrupteur, un bloc qui s'emboite dans le premier pour stabiliser et servir de pied un bloc a…
I printed these in support of drain tubes for a new tonneau cover for a 2022 Nissan Frontier Pro 4X. This kit had 18 mm OD silicone tubes. The original grommets had different sized holes from a previous cover. These are a tight fit on…
passend für: Intel RealSense D415 https://www.amazon.de/gp/product/B07JVGRQZT/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1 Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Category: Other
Pas envie de laisser vos modules en l’air ? Pour un prototypage propre, voici un support simple à visser pour MOSFET D4184, spécifique à ce modèle de PCB (voir photo). ✔ Montage rapide ✔ Maintien propre ✔ Adapté exactement au module…
Door prop for the IWUD4015 washing machine. *estimated print time and material usage (P1S, 0,16mm layers, PLA, 3perimeters): 28m, +-8,7g
All D and F Series part are compatible
This is 5x6 Gridfinity bin designed to hold a Brother P-Touch D400/410 label maker + six 12mm TZe tapes. I've printed it in PLA and it fits in an Ikea Alex drawer.
Wall Mount for Fenix LD41 Flashlight
watch stand for CMF Watch Pro 2
Remix for newer Meteo Mini board with dimensions 48,4 x 32,9 x 9 mm Original was for 54,5 x 32,9 x 7 mm
Created from a number of images of the engines in my boat. a few details are a bit of like the exhaust pipe is a bit to far back. Also the cooling hose on top of the engine easily breaks of after printing.
Sensirion SCD41 CO2 development board mockup based on datasheet dimensions.
how to build All sensors are from Sensirion. They all use I²C bus. The two little ones can withstand 3.3V and 5V, the PM sensor needs 5V. I choose to operate the little ones at 3.3V to minimize their heating. The SCL and SDA wires can be…
Note: this doesn't use the cab's speakers in any way. I just needed a coffee table in my studio more than I needed another bass cab, and I really wanted people at that end of the room to be able to get a headphone mix easily :D Parts…
Craftsman Raised Panel Wrench Organizer LoserKid418 Remix by Disney7 Remixed by me. printed and found not all my wrenches fix right and it was easy to break. so i added a but of supports for the separators and id print walls at 3.…
Fits unknown-brand 4.5" vinyl siding. Two parts are available: One uses two rectangular pins for alignment and requires gluing. The other is a single unit, but requires supports. Update Made pins symmetrical, so angle can be reversed
Here is a Amcrest ad410 Video Doorbell 45 Degree(Left) Mount. I found other mounts but only for the Amcrest ad110. Print with PETG and 50% infill. Enjoy!
