Weather station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've build my own, small and easy weather station: It's based on an ESP8266-Microcontroller (Wemos D1 mini)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 2295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
I've build my own, small and easy weather station:
It's based on an ESP8266-Microcontroller (Wemos D1 mini), which is reading the data from a sensor called "BME280" and sending them via WIFI to a homebuild API.
To be able to install the sensor somewhere outside, I've designed this case.
It consists out of three parts:
- Controllerhousing
- Rain protection
- Barclamp
The BME280 is available in different sizes, I've got one single- and one double-layered.
This is, why two different housings are available.
Please check your sensor and choose the right model above.
The bar I attached the sensor to, is from another project, a few years ago:
https://www.prusaprinters.org/prints/68525-outdoor-windowmount
To connect the clamp with the rain-protection-model use an 8mm rod.
You want some code to build your weatherstation? Here you go:
https://github.com/flazer/weather-station
Here are two video I've made, while building this thing (Sorry, german only):
Part 1: https://youtu.be/KMwVNuzghsY
Part 2: https://youtu.be/H0V1uFBAILE
Post-Printing
Avoiding environmental influences
The models are printed with PETG. To avoid environmental influences, I've primed and painted all parts multiple times.