Voron V0 first layer test print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick print to test the first layer / bed level for the Voron V0. In the style of the prusa first layer test prints.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 417
- Wydruki
- 0
- Wyświetlenia
- 916
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
A quick print to test the bed level for the Voron V0 family of printers.
I'm currently building a V0 and wanted to do a first layer test print in the same style as the Prusa Research bed level test print.
So I quickly created a simple test print in fusion.
The Print is 118mm x 118mm this leaves a 1mm gap between all print bed borders.
And as the print is 118x118 you could just use it on you printer that has a similar size of course.
The print is marked for a quick diagnosis of where the bed is to high / low.:
LF : Left Front
RF : Right Front
LR : Left Rear
RR : Right Rear
The circles mark where adjustment screws for the bed are located.
The main part of the print is 0.2mm high , the letters are 0.4mm high.
Advised print settings :
Layer height : 0.2mm
Nozzle 0.4mm