Voron V0 first layer test print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick print to test the first layer / bed level for the Voron V0. In the style of the prusa first layer test prints.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 417
- Makes
- 0
- Views
- 916
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
A quick print to test the bed level for the Voron V0 family of printers.
I'm currently building a V0 and wanted to do a first layer test print in the same style as the Prusa Research bed level test print.
So I quickly created a simple test print in fusion.
The Print is 118mm x 118mm this leaves a 1mm gap between all print bed borders.
And as the print is 118x118 you could just use it on you printer that has a similar size of course.
The print is marked for a quick diagnosis of where the bed is to high / low.:
LF : Left Front
RF : Right Front
LR : Left Rear
RR : Right Rear
The circles mark where adjustment screws for the bed are located.
The main part of the print is 0.2mm high , the letters are 0.4mm high.
Advised print settings :
Layer height : 0.2mm
Nozzle 0.4mm