Ender 3 v2 Neo drawer octopi mount & tools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a drawer for a raspberry pi, leaving space for tools/nozzles/etc
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Patreon - https://patreon.com/CosmicNimbusPrinting
Cults3D - https://cults3d.com/en/users/CosmicNimbus
Hi Ender 3 v2 / Neo user !
This is a remix of an Ender 3 v2 drawer from thingiverse. I've given the drawer back a section on the right for tools and nozzles and such, so it can be used as a drawer again! I emptied the drawer mostly before taking photos to show the space
I've also added 2 holes in the front (on the left side) for the pi's power and camera connection. I have my pi now connected to the PSU with a buck converter (to dial down to 5v), but I was running the stock raspberrypi4 powersupply through the hole at the beginning. You can do this too, but you will need a 90 degree angle USB C adaptor for the plug to fit - I just ordered a cheap one online.
There are a few errors in the model, but Cura does a good job cleaning this up.
NOTE: Print this in PETG so it is not a fire risk, PLA is flamable.
Happy Printing ! <)