Dual LED Light Bar Prusa MK4 with screw hole for securing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of https://www.printables.com/model/493459-led-light-bar-prusa-mk4 for dual lights.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 96
- Wydruki
- 4
- Wyświetlenia
- 696
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I don't like using glue when attaching parts that I could foreseeably need to take apart or modify in the future, so I added screw holes for mounting the light bar supports.
The Z-Axis tops have a hole in the center of the hex depression that should have M3x4 heat set inserts (e.g. https://www.adafruit.com/product/4255) applied.
The dual mounting bars have a screw hole for securing to the Z-Axis tops using M3 screws. I used M3x12, but you could probably go a little shorter or longer without a problem.
For the change, I used Tinkercad and the modifications can be found at:
- https://www.tinkercad.com/things/5RgwPTTcGCy-mk4hexz-axistop-with-m3-screw-hole
- https://www.tinkercad.com/things/c2WSszUyWkd-mk4dualmount-with-m3-screw-hole