Dual LED Light Bar Prusa MK4 with screw hole for securing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of https://www.printables.com/model/493459-led-light-bar-prusa-mk4 for dual lights.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 96
- Makes
- 4
- Views
- 696
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I don't like using glue when attaching parts that I could foreseeably need to take apart or modify in the future, so I added screw holes for mounting the light bar supports.
The Z-Axis tops have a hole in the center of the hex depression that should have M3x4 heat set inserts (e.g. https://www.adafruit.com/product/4255) applied.
The dual mounting bars have a screw hole for securing to the Z-Axis tops using M3 screws. I used M3x12, but you could probably go a little shorter or longer without a problem.
For the change, I used Tinkercad and the modifications can be found at:
- https://www.tinkercad.com/things/5RgwPTTcGCy-mk4hexz-axistop-with-m3-screw-hole
- https://www.tinkercad.com/things/c2WSszUyWkd-mk4dualmount-with-m3-screw-hole