1 / 2
Creality K1 & K1 Max Toolhead Cover/Shroud with LIDAR gap — zdjęcie 1
1 / 2

Creality K1 & K1 Max Toolhead Cover/Shroud with LIDAR gap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix because at the K1 Max always needs unplugging the LIDAR cable which isn't necessary any more with this.

Ocena
4,667 / 5
Polubienia
79
Pobrania
534
Wydruki
3
Wyświetlenia
3449
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This remix was made because every single time I change a nozzle I had to unplug the cable from the LIDAR and put it back in again. That was every single time quite time intensive and the plug was prune to bending the pins.

Reforcements were added to make it less breakeable.

  • Printed with ABS and small tree support. 
    Edit: PETG struggled and I did it now in ABS.

Please ensure in the slicer that the tree support supports the whole top.

Many thanks to @DerrickDarrell for creating the original model for this remix.

 

Tagi