1 / 2
Parameterized Skadis Universal ring holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Parameterized Skadis Universal hook ring holder with possibility for cutout at front.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 359
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (42)Powiązane
I started off with ripetomatofetish's great round holder for the universal Ikea Skadis hooks. However I was missing a little bit of offset between the ring and the baseplate. In the end I did a major overhaul and added a number of parameters to easily adapt it to different needs.
Requires one Skadis_Universal_Hook from CSD Salzburg's IKEA SKADIS Universal Hook Set.
No support needed.
New features include:
- Parametric distance between ring and base
- Parametric height to decouple ring thickness from ring height
- Parametric cutout at the front of the ring (Handy for things that won't fit through the ring from the top, like my chisels)
- curved part of the connector scales together with the ring height to give a better visual impression
- in case the ring height gets too big, the curvature of the connector is minimized to prevent obstruction of the mounting hole
- added assertions to check parameters for plausibility, i.e. you're not allowed to block the mounting hole by a ring being too high
- moved all user-modifiable parameters to the top for improved convenience