Vigor V6907 Super Lube Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Super Lube Grease now fits the super cool Vigor grease gun
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Prusa recommends the Synco Super Lube (21030) for lubrication of the rods and axial bearings of all printers. There are a lot of models out there to fit on the tube, but the dosing of the grease with pressure on the tube is something between gambling and wasting grease.
I found that super cool and high quality grease gun from Vigor and want it to use with the Super Lube tubes.
After a few tests here is the perfect adapter. It is designed to be used with a 2x12 (ID) o-ring, but works outstanding without.
TIP: printing with 0.10 layers will give perfect threads. Print upright as seen in the pictures and use no support.
Technical details: Inner thread M 13,5x1,5 mm; outer thread M 15x1,5 mm (optimized for printing with PETG)