Convenient foldable holder for 2 LED lighting controls
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Foldable LED holder for 2 LED Remote controllers
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
If you also need 2 LED lighting remote controls for lighting reasons, this model may be something for you. The remote controls are always to hand and in the right place (provided you use the wall bracket). However, the wall bracket is not absolutely necessary. The remote controls are also protected from damage.
The print does not require any support. Standard settings should be sufficient. I printed the posted model with 0.16mm layer height, but I don't think the layer height plays a big role.
However, since it is a foldable part, it is recommended to set the infill to at least 40%, otherwise the central hinge rod may break due to poor layer adhesion.
Happy printing