Ford Ranger T7 3rd stop light blank plate adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Blanking plate to remove the 3rd stop light on a 2017 Ford ranger XLT to fit a canopy
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 795
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I tried to fit a Beekman fibreglass canopy to the back of a 207 Ford Ranger XLT and found out that the bulky 3rd stop light / loadbin light was in the way and hitting the canopy at the top. Apparently some canopy manufacturers sell one but I could not get hold of it, so I made this. Use 2mm-3mm sealing foam between this and the cab to prevent moisture ingress and put a bit of sealant over the screw heads to protect them from the elements. I also made a channel on the underside to allow for a silicon bead if you wanted to stick it more permanently. I spray painted mine with some enamel white after sanding the top and priming it so it will last in the sun.