Ford Ranger T7 3rd stop light blank plate adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Blanking plate to remove the 3rd stop light on a 2017 Ford ranger XLT to fit a canopy
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 109
- Makes
- 0
- Views
- 797
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
I tried to fit a Beekman fibreglass canopy to the back of a 207 Ford Ranger XLT and found out that the bulky 3rd stop light / loadbin light was in the way and hitting the canopy at the top. Apparently some canopy manufacturers sell one but I could not get hold of it, so I made this. Use 2mm-3mm sealing foam between this and the cab to prevent moisture ingress and put a bit of sealant over the screw heads to protect them from the elements. I also made a channel on the underside to allow for a silicon bead if you wanted to stick it more permanently. I spray painted mine with some enamel white after sanding the top and priming it so it will last in the sun.