1 / 3
Voron 0.2 - Belt tensioner coverplate with wire guide — zdjęcie 1
1 / 3

Voron 0.2 - Belt tensioner coverplate with wire guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a little cover to hide the stepper pulleys with integrated wire guide (for e.g. Neopixel)

Ocena
5 / 5
Polubienia
27
Pobrania
96
Wydruki
2
Wyświetlenia
765
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

When mounting neopixel/led bars on the upper extrusion frame, it is hard to hide the corresponding wires.

Therefore I created a little cover that fits onto the A/B stepper tensioner to hide the wires (partially) and also the pulley itself.

You have to replace the two M3x30mm BHCS screws on the back with M3x40mm BHCS ones to screw the cover in place.

Tagi