Modular drawer (Vase mode) for Electronics component etc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular Drawer + Cabinet for electronics components
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 132
- Wydruki
- 3
- Wyświetlenia
- 903
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I tried other drawers, but none met my needs and the tolerances weren't right, so I designed my own version.
The single model is 40x25x70 and prints in approximately 43 minutes + 21 minutes in vase mode with a 0.6 nozzle. After printing, the internal dimensions will obviously be smaller, so I recommend increasing the depth in case you need to store resistors.
The versions in the photo were printed with a 0.4 nozzle, but setting the slicer as if it were 0.6
The model is an original creation, but inspired and not remixed by
https://www.printables.com/it/model/394348-modular-drawer-for-electronic-components-vase-mode