Upgraded bracket for Ender 3 - 5015 Part Cooling Fan Shroud Magnetic (with BL touch mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An upgraded ender 3 mounting bracket for the magnetic 5015 parts cooling shroud
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 105
- Wydruki
- 1
- Wyświetlenia
- 859
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Better mounting bracket for the ender 3 and includes a mount for a BL Touch, look at the differences section to see the improvements.
As the shroud itself was not modified it hasn't been included, download it from the original author at https://www.printables.com/model/405037
BL touch x and y offsets (in klipper format):
x_offset: -40.5
y_offset: -7.5
Extra hardware needed for mounting BL touch:
- 2xM3 screws (at least 15mm long)
- 2xM3 nuts
- 4 magnets (6mm diameter, 2mm thickness, same as gridfinity)
(yes they are 1mm shorter than the original design, you do not need two different magnet sizes, they fit just as well on the shroud, i didn't even use a spacer, also you need another 4 for that so really 8 magnets)
The original Ender3 shroud screws are just long enough to be reused for mounting the new bracket, and therefore aren't listed, although you are welcome to use longer screws
3mf and step file available
The print should not need supports, but might need some post processing if the bridging for the screw head pockets fails, the tolerances are pretty small