1 / 4
Paint Booth with Turntable and exhaust fan — zdjęcie 1
1 / 4

Paint Booth with Turntable and exhaust fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printable turntable paint booth with exhaust duct for hobby painting.

Ocena
0 / 5
Polubienia
45
Pobrania
179
Wydruki
0
Wyświetlenia
1278
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is a paint booth. It is fully 3D printable except for a standard 120mm PC fan for the exhaust. You can wire the fan wires (positive and negative) directly to a 9v battery pack, a 12v battery or a 12v power supply. This uses a dryer sheet on the tray that is held in place by rubber bands on 4 pegs on the filter tray. The turntable allows you to move items around to paint them from all sides. The exhaust pipes are stackable so that you can reach something like a vent fan over your stove. The files are F3D. You will need Fusion 360 to open them and print them. The individual .ipt files are Inventor files, but they will open in Fusion 360 as well. Simply open the F3D or .ipt file in Fusion 360, go to the utilities tab, and then 3D print. You do not need to print the 120mm fan model. That is only there for demonstration. 

Tagi