1 / 5
Frame for TJC4827x243_011_P02 screen — zdjęcie 1
1 / 5

Frame for TJC4827x243_011_P02 screen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter from TJC4827x343 to TJC4827x243

Ocena
0 / 5
Polubienia
1
Pobrania
24
Wydruki
0
Wyświetlenia
243
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

After I gave my Tenlog TL-D3 Pro the 32bit motherboard and, according to Tenlog, a different screen is also necessary, I bought the TJC4827x243 without first checking what kind of screen my printer has. Of course, the new screen no longer fit into the case at the front or back. So a new housing was needed. Since I wanted to have the Micro SD card slot freely accessible - I'm not keen on SD card extensions - I decided on this variant that you see here.

Addendum: an intermediate frame to raise the display, now you can also access the microSD card. The extender is screwed onto the adapter plate (part 1). Screws M3x8

Part 2 V2 is screwed to the extender with the display. Screws M3x10 or M3x12

Part 3 V2, a little flatter and the screen section has been enlarged.

*Screw size M3

Tagi