Frame for TJC4827x243_011_P02 screen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter from TJC4827x343 to TJC4827x243
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After I gave my Tenlog TL-D3 Pro the 32bit motherboard and, according to Tenlog, a different screen is also necessary, I bought the TJC4827x243 without first checking what kind of screen my printer has. Of course, the new screen no longer fit into the case at the front or back. So a new housing was needed. Since I wanted to have the Micro SD card slot freely accessible - I'm not keen on SD card extensions - I decided on this variant that you see here.
Addendum: an intermediate frame to raise the display, now you can also access the microSD card. The extender is screwed onto the adapter plate (part 1). Screws M3x8
Part 2 V2 is screwed to the extender with the display. Screws M3x10 or M3x12
Part 3 V2, a little flatter and the screen section has been enlarged.
*Screw size M3