LDO Orbiter 1.5 Prusa Mini/MINI+

I want a better grippe and lighter on my prusa MINI/MINI+ so i came with this design mounted and setup very easly  print without support ..

what you need !

LDO orbiter 1.5

https://caribou3d.com/en/ldo-extruder/728-ldo-orbiter-extruder-v15-175mm.html

https://www.filastruder.com/products/ldo-orbiter-v1-5-150g-dual-drive-direct-extruder

there are 2 version with 

1-   heat insert M3 X D4.6 X L5.5 

https://fr.aliexpress.com/item/4000232858343.html?spm=a2g0s.9042311.0.0.614f6c37wj8Nnx

2- simple square nut 

https://fr.aliexpress.com/item/4001297742166.html?spm=a2g0o.productlist.0.0.5e8651a0JjzQ8R&aem_p4p_detail=202106271210592212738475227200013877505

pick what you have such hardwares 

2x M3 10mm for mount the bracket on the X-carriage 

2xM3 8mm for mounting the orbiter on the Bracket

1xm3 Nut and 1xM3x18 to 20mm to secure the PTFE tube with Fsensor

important 

this lines should be added befor the ; intro line  in start g-code in Prusa slicer

M92 E677 ; Orbiter steps
M906 T0 E320 ;Set extruder current

if you want to load and unload proberly rename this file with  step.gcode and run it on the printer like any print file 

Printed with ABS  40% infil 0.2 layer Height 

can be printed with ASA / PET-g 

Appreciate my work ?

buy me a coffe 

https://www.paypal.com/donate/?hosted_button_id=9EL8CEDVY28DA

thank you and happy printing