1 / 5
Simple Stone Dice Tower v1 and v2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Short and quick Simple Stone Dice Tower print. Use with or without the base.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 364
- Wydruki
- 2
- Wyświetlenia
- 1233
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (0)Kolekcje (76)Powiązane
My son wanted a dice tower of his own as he had been using an early version of one of my dnd boxes for rolling dice. I quickly put this together for him and had it printed in a couple hours. The base and the tower lock together so they don't move around.
Version 2 Changes:
- Noticed that my kids were breaking the parts off the top. Added a bar around the top to make them more sturdy
- Added parts to the underside of the ramps so that it could print without supports
- Filled in the part under the bottom ramp so that it was solid and not hollow
- Changed the front wall on the base to be thicker and a little more snug when the tower is stored in it.
Info:
Tower v1:
- Overall size: 99.68mm tall x 51.37mm wide x 51.37mm deep
- Supports needed
- Suggest blocking supports on the underside of the tower as they are a pain to remove
Tower v2:
- Overall size: 99.68mm tall x 51.37mm wide x 51.37mm deep
- No supports needed
Base v1 & v2:
- Overall size: 27.69 tall x 59.39 wide x 119.39 deep
- No supports needed