1 / 5
Round Rocker Switch Housing Wall Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and easy-to-print housing and wall mount for a round rocker switch.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 338
- Wydruki
- 1
- Wyświetlenia
- 1251
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (70)Powiązane
This is a housing for a round rocker switch to mount it to the wall. There are two versions to choose from: Either print the regular housing and connect the wires afterwards, or print the two halves to use it with a switch that is already wired in (and you don't feel like redoing it like me ;)).
The parts are designed for rocker switches with these dimensions:
Print settings
- All parts print as they are oriented, with the face on the build plate.
- No supports necessary.
- Make sure your printer is good at printing overhangs so they look nice, but all overhangs are designed at a 45-degree angle and are easy to print.
- Print in a material suitable for the intended use.
Materials
- Regular #8 wood screws to mount it to a wall.
- For the Split - A & B housing: two M3x8 SHCS and two M3 nuts to join them.