1 / 5
Round Rocker Switch Housing Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple and easy-to-print housing and wall mount for a round rocker switch.
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 338
- Makes
- 1
- Views
- 1,251
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a housing for a round rocker switch to mount it to the wall. There are two versions to choose from: Either print the regular housing and connect the wires afterwards, or print the two halves to use it with a switch that is already wired in (and you don't feel like redoing it like me ;)).
The parts are designed for rocker switches with these dimensions:
Print settings
- All parts print as they are oriented, with the face on the build plate.
- No supports necessary.
- Make sure your printer is good at printing overhangs so they look nice, but all overhangs are designed at a 45-degree angle and are easy to print.
- Print in a material suitable for the intended use.
Materials
- Regular #8 wood screws to mount it to a wall.
- For the Split - A & B housing: two M3x8 SHCS and two M3 nuts to join them.