HSK ACE and 4K Modkit (~20g)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on an HSK ACE and 4K mod. With PLA, small grips, and dot skates, you should be able to hit 20g
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 870
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
The is the second Fingertip mod I've created and I've decided to call these the "Beta" series since I'm still learning a lot as I go. By the end of the year I would like to have finalized versions of the ones I released with all of the strategies I learn along the way. Anyway, here are printing tips.
Printing/Assembly Tips-
-Print as is, do not reorient the print
-Squeeze the clicks inwards if there is too much pretravel
-Silk PLA Gold was my material of choice and when done I hit 19.63g (and it looks good as hell)
-Leave the scroll wheel in when placing in the first PCB
-I left all standoffs on but I do not bother screwing in the back screws on the PCB with the clicks on it, only the fronts
-Reach out to me either here or on anyone of my videos for assistance and I will try and help
-If you'd like to adjust anything, here is the OnShape link, go wild: https://cad.onshape.com/documents/0f3d446137e3935b8cfb2fa6/w/dab0eeea535fceb5313de53f/e/3f350d103cf2a668601c6fc6?renderMode=0&uiState=6591b89b5531ce75ff44cb76