Arduino UNO Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The simple case for the Arduino. It requires 4-8 screws M4 4mm and gives you the ability to include a prototype board.
- Ocena
- 4,625 / 5
- Polubienia
- 97
- Pobrania
- 492
- Wydruki
- 9
- Wyświetlenia
- 2457
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple case for the Arduino UNO that might additionally contain a small prototype board.
It doesn't require any special print settings, and you should be able to print it without any support.
To screw down the Arduino board you need 4 screws M3 4mm.
Additionally, you may want to attach a cap so you need to have an additional 4 screws M3 4mm.
The prototype board you can find on the AliExpress:
https://www.aliexpress.com/item/1005003746706230.htm
With the last update, I've included a button and also made a bit more tolerance on hinges