Arduino UNO Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The simple case for the Arduino. It requires 4-8 screws M4 4mm and gives you the ability to include a prototype board.
- Rating
- 4.625 / 5
- Likes
- 97
- Downloads
- 492
- Makes
- 9
- Views
- 2,457
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a simple case for the Arduino UNO that might additionally contain a small prototype board.
It doesn't require any special print settings, and you should be able to print it without any support.
To screw down the Arduino board you need 4 screws M3 4mm.
Additionally, you may want to attach a cap so you need to have an additional 4 screws M3 4mm.
The prototype board you can find on the AliExpress:
https://www.aliexpress.com/item/1005003746706230.htm
With the last update, I've included a button and also made a bit more tolerance on hinges