1 / 4
Sewing Pedal Holder W6 N8000 - Nähpedalhalter — zdjęcie 1
1 / 4

Sewing Pedal Holder W6 N8000 - Nähpedalhalter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A holder to keep the Sewing pedal organized

Ocena
0 / 5
Polubienia
7
Pobrania
33
Wydruki
0
Wyświetlenia
253
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

This is a Sewing-pedal-holder.

It holds the sewing Pedal of a W6 N8000.

I 

 

Version 1 is for Screwing it in and not getting it out (More rigid for Kids in household)

You need 3 Screws:

1 x 70mm (max. 3mm thick)

2 x 35mm (max. 3mm thick)

Its ready to Print (correct orientation)

 

Version 2 is for doubled sided Tape or small screws 

Use at Least 1cm wide double sided Tape. 

or 

5x 10-20mm screws. (max. 3mm thick)

I havent tested this version, but it should work, also prints without support.

Its ready to Print (correct orientation)

Tagi