1 / 4
Sewing Pedal Holder W6 N8000 - Nähpedalhalter — image 1
1 / 4

Sewing Pedal Holder W6 N8000 - Nähpedalhalter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A holder to keep the Sewing pedal organized

Rating
0 / 5
Likes
7
Downloads
33
Makes
0
Views
253
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

This is a Sewing-pedal-holder.

It holds the sewing Pedal of a W6 N8000.

I 

 

Version 1 is for Screwing it in and not getting it out (More rigid for Kids in household)

You need 3 Screws:

1 x 70mm (max. 3mm thick)

2 x 35mm (max. 3mm thick)

Its ready to Print (correct orientation)

 

Version 2 is for doubled sided Tape or small screws 

Use at Least 1cm wide double sided Tape. 

or 

5x 10-20mm screws. (max. 3mm thick)

I havent tested this version, but it should work, also prints without support.

Its ready to Print (correct orientation)

Tags