Dell Power Connect Network Switch Riser (2716 and other models)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple riser to raise your network switch for cable management
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Its a simple riser for a Dell Power Connect. I modeled this with a 2716 in mind, but i believe there are many other power connect models this should work with.
I disliked how the network cables came out so i needed to add a bit of space underneath. I used the power connect's existing screw holes for rack ears. The sides are reversable, so there is no left or right, the back ear just does not screw into anything.
Use M3x6mm screws to attach. I recommend at least 2 screws in each side as shown in my photos, but feel free to use 4 (im just cheap)