NA Miata Turn Signal Intake Light Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NA Miata Turn Signal Intake Light Housing
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 2599
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If your turn signal bulb broke and melted your lens and light housing, here's a replacement! The model is a pair featuring 2 replacement light housings for TSI's such as the ones in the picture above (pictured before replacement). They should be printed in a high-temperature material such as PC. For the new lenses, I used 1/8" UV/scratch-resistant clear PC and sanded the backside to fog them out. To cut the lens just trace the outline of the housing and then file/grind the edges to make them align with the body of the housing. You will need to drill a small hole depending on the thickness of the lens you choose and the location of the retaining screw.
