1 / 5
Use Displate as Side panels for for the Bambulab P1P — zdjęcie 1
1 / 5

Use Displate as Side panels for for the Bambulab P1P

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The idea here is to simply use displates as sides panels, it look cool and only need a few magnets to work.

Ocena
0 / 5
Polubienia
5
Pobrania
24
Wydruki
1
Wyświetlenia
577
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

So, I was building the enclosure for my 3D printer (P1P), and I had not decided yet what to use for the side panels. I looked around and saw two displates laying around, and I thought :

 " what if ? "


I grabbed one, put it next to the P1P, and it turns out it's the exact perfect size. So, I modified the piece to support the displates, and voila. 


For the printing, I advise using support for the two knobs sticking out. (as in the pictures)
(it works for both sides btw, no left / right, just print it two times)

I fixed the part with a few screws and bolts. Make sure your screws will fit all the way in the holes; there are two versions:

  • The first with 3mm holes designed to fit standard M3 screws.
  • The second with 7mm holes if needed.

Finally, you are going to need a few magnets. I used 6mm x 3mm magnets found on Amazon, used 4 stacks of two on each side, as you can see in the pictures, and it works great.

I wish you all good prints ^^

Tagi