Use Displate as Side panels for for the Bambulab P1P
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The idea here is to simply use displates as sides panels, it look cool and only need a few magnets to work.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 1
- Views
- 577
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
So, I was building the enclosure for my 3D printer (P1P), and I had not decided yet what to use for the side panels. I looked around and saw two displates laying around, and I thought :
" what if ? "
I grabbed one, put it next to the P1P, and it turns out it's the exact perfect size. So, I modified the piece to support the displates, and voila.
For the printing, I advise using support for the two knobs sticking out. (as in the pictures)
(it works for both sides btw, no left / right, just print it two times)
I fixed the part with a few screws and bolts. Make sure your screws will fit all the way in the holes; there are two versions:
- The first with 3mm holes designed to fit standard M3 screws.
- The second with 7mm holes if needed.
Finally, you are going to need a few magnets. I used 6mm x 3mm magnets found on Amazon, used 4 stacks of two on each side, as you can see in the pictures, and it works great.
I wish you all good prints ^^
