KTM / Husky / GasGas Threaded Oil Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Oil funnel to fit most 250, 350 & 450 KTM / Husky / GasGas.
- Ocena
- 5 / 5
- Polubienia
- 103
- Pobrania
- 948
- Wydruki
- 4
- Wyświetlenia
- 3300
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Threaded oil funnel to fit most 250, 350 & 450 KTM / Husky / Gasgas motocross bikes.
The funnel threads directly into your existing oil reservoir for easier oil refills. Air vent integrated into funnel to allow for fast pours with no spills. The thread is M24 x 3. Please check this is compatible with your bike before attempting to use.
Print settings:
- 0.2 layer height*
- 100% infill**
*A 0.25 layer height gives sufficient resolution to get a good finish. I however recommend using 0.2 layer height, especially for the threaded portion.
**I used 4 perimeters to obtain a “solid body”.
Print with funnel side on print bed and threaded portion at top. No supports required.
Please feel free to leave any comments on possible improvements to the model.
Hope you enjoy and this proves useful.