Mountable ESP32 Screen (CYD) case with pen holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mountable case for the CYD or ESP32-2432S028, with a pen holder on top.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 248
- Wydruki
- 1
- Wyświetlenia
- 2522
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a case for the Cheap Yellow Display or ESP32-2432S028. I designed this case to have a hole for storing the pen on top. It can also be mounted, using the mount with the mountable case. I made this case to mount my screen to my IKEA lack enclosure, and run klipper-screen on the ESP. The screen is also easily removable from the mount.
The case itself is put together using 4x M3-12mm countersunk screws. And the mount can be attached to any object using 4mm self-tapping screws.
There is only one hole in the case for the USB-C port, and custom buttons to reach the reset and boot buttons.
I also made a version without a slot for mounting, for a lower profile case that cannot be mounted.
Everything can be printed without support.