1 / 16
UFS-094 More T-Handle Hex Allen Key Wrench — zdjęcie 1
1 / 16

UFS-094 More T-Handle Hex Allen Key Wrench

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

When I got a second printer I got another set of free Allen wrenches. I decided to try out these handles.…

Ocena
4,944 / 5
Polubienia
550
Pobrania
2948
Wydruki
78
Wyświetlenia
10 694
Oceny
71

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update Late Feb 2024: 

We had far too many wrenches on the bench, so we designed this new Allen wrench holder for all nine sizes. https://www.printables.com/model/776625-ufs-155-t-handle-hex-key-holder-allen-wrench-holde . Stop by and download for free. Leave a comment if you like the design. Thanks

Update Early Feb 2024:

The original set of five handles was enough for the cheap Allen wrenches you get when you buy a 3D printer. And for this they did a great job, but there are more larger sizes out there. I decided to add 5mm through 10mm. To do this the handles have to get bigger.

I started with these here: https://www.thingiverse.com/thing:4681814 . I added numbers to match the smaller wrenches. Then when I printed the first one, I found out that CagedChimp hadn't tested them and they were too small. So I scaled them up and they worked great. I added a 10mm size that was still missing. 

You will have to print the handle and the matching posts for the large sizes.

Original post:

When I got a second printer I got another set of free Allen wrenches. I decided to try out these handles. https://www.thingiverse.com/thing:951909.  You can also find it here on Printables, https://www.printables.com/model/16557-t-handle.

They fit well and hold the wrench, but didn't have the sizes marked on the handles.

I modified these to have the wrench size marked on the top and on the side. This helps pick the correct wrench.

If these work for you, then please give a like to the original designer. https://www.printables.com/model/16557-t-handle 

Print Settings

Printer:

Artillery Genius

Prusa MK3S+

 

Rafts: 

No

Supports:

 

No

 

Resolution: 

0.2

Infill:

 

35% or more

Filament: Any PLA Any 
 

Notes: 

Supports are not recommennded. May need a brim.

 

 

 

Category: Hand Tools

Tagi