1 / 6
Stone Pillars Planter Pot, with Drainage Holes and Tray, Icelandic/Nordic Design — zdjęcie 1
1 / 6

Stone Pillars Planter Pot, with Drainage Holes and Tray, Icelandic/Nordic Design

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A two-part planter pot inspired by the basalt stone pillars of southern Iceland.

Ocena
5 / 5
Polubienia
377
Pobrania
745
Wydruki
5
Wyświetlenia
3108
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial

See below for important print settings. 

Inspired by the basalt stone columns located in southern Iceland, this planter features a stone-like texture that captures the natural beauty of Reynisfjara beach.

This planter also features a two-part system, including a removable pot with drainage holes and a base with a built-in water drainage reservoir. Thanks to the ample drainage, this planter is suitable for any small succulent, cactus, or other houseplant.

The pictured prints were done with Bambu Matte Light Gray filament. 

SIZES:
Pot (Interior Dimensions):
-Small: 3"L x 3.5"W x 3"H
-Medium: 4"L x 4.5"W x 4"H
-Large: 5"L x 5.5"W x 5"H
with Base:
-Small: 5.5"L x 5.5"W x 3.5"H
-Medium: 7"L x 7" W x 4.5"H
-Large: 9"L x 9"W x 5.5"H

My Print Settings:

  • 0.2mm layer height
  • Fuzzy skin enabled (Use these settings to ensure a good fit between the pot and the base)
    • Point Distance: 0.4mm
    • Thickness: 0.15mm
  • Ironing on all top surfaces
  • 10% infill
  • 3 walls

This model is not for commercial use. If you are interested in selling your 3D prints of my models, please refer to my Patreon!

If you like this design, consider leaving a tip! I'm a university student that designs planters on the side, so anything helps!

https://www.paypal.me/theprintedplanter

Tagi