Ender 3 V2 Neo Sprite Pro with Sideways Cable Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sideways Cable Guide along the X gantry and modified X-stop housing.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 1098
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Please read the in station guide for the X-stop housing on the original model. It's essentially the same.
I have added 4 holes for threaded inserts in the original X-stop housing to be used as mount points.
I wasn't able to find any cable guides for the Sprite that aligned with what I wanted, so I made one myself. It replaces the original rubber guide and redirects the cable 90° to the left along the X gantry. You need to leave enough cable length before putting it in the Cable Guide X. The guide X is mounted using a countersunk M3x10 bolt to the flat side of the X-stop housing. I have also included a mirror version of it.
I have also included a camera mount. It's specifically for my camera, but it could be of used to someone else.
You need to print Sprite_Curved_Cable_Guide with supports. The other models don't need support.
If you have a dual Z with Timing/Synchro belt, It is possible for the Sprite_Curved_Cable_Guide to collide with the tensioning gear. It's possible for my setup and to avoid that I reduce the max z to 245mm.