Ender 3 V2 Neo Sprite Pro with Sideways Cable Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sideways Cable Guide along the X gantry and modified X-stop housing.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 96
- Makes
- 0
- Views
- 1,098
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Please read the in station guide for the X-stop housing on the original model. It's essentially the same.
I have added 4 holes for threaded inserts in the original X-stop housing to be used as mount points.
I wasn't able to find any cable guides for the Sprite that aligned with what I wanted, so I made one myself. It replaces the original rubber guide and redirects the cable 90° to the left along the X gantry. You need to leave enough cable length before putting it in the Cable Guide X. The guide X is mounted using a countersunk M3x10 bolt to the flat side of the X-stop housing. I have also included a mirror version of it.
I have also included a camera mount. It's specifically for my camera, but it could be of used to someone else.
You need to print Sprite_Curved_Cable_Guide with supports. The other models don't need support.
If you have a dual Z with Timing/Synchro belt, It is possible for the Sprite_Curved_Cable_Guide to collide with the tensioning gear. It's possible for my setup and to avoid that I reduce the max z to 245mm.