1 / 2
Angled wall-mount bracket for Lutron Caséta motion sensor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall-mount bracket for your Lutron Caséta motion sensor that is angled to get the best coverage for your room
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This angled wall-mount bracket for your Lutron Caséta Smart Motion Sensor (PD-OSENS or PD-VSENS) allows you to set it up at an angle on a flat wall. In the second picture, you can see the original and my angled version side by side.
So far, I have a -7.5° horizontal and -10° horizontal versions, but you can message me for other angles.
Printing instructions
- Choose the version you want.
- Print the .stl file as-oriented.
Operating instructions
- Install following the instructions supplied with your motion sensor, using this instead of the flat wall-mount bracket.
- Note that the larger opening is down, and the smaller opening is up.
- The sensor will click into place just like with the original bracket.
Notes
- I designed this model in OpenSCAD and it's fully parameterized. If you'd like a simple modification (i.e., horizontal or vertical angle, standoff distance), send me a message and I'll try to do that quickly for you.