1 / 4
Skadis • Bosch Zamo Laser Measure — zdjęcie 1
1 / 4

Skadis • Bosch Zamo Laser Measure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An Ikea Skadis mount for Bosch Zamo Laser Measure

Ocena
5 / 5
Polubienia
7
Pobrania
74
Wydruki
3
Wyświetlenia
643
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

This is a remix of Skadis Holder Bosch Zamo by Lansolo81 modified to be mounted with T-Nuts. 

I always prefer using this system in M2.5 or M3 to avoid any movement, so both options are available. A vertical alignment guide is directly integrated into the model to facilitate installation.

Discover Skadis Accessories That Use T-Nuts

You can find many Skadis accessories that use Skadis T-Nuts in the Skadis T-Nuts Collection (over 170 models and growing). Also check out the “skadistnut” tag.

 

Accessories

This is a list of accessories required to mount the holder for both versions.

M2.5 Version

QtyDescription
1Skadis T-Nut (M2.5)
1M2.5 Hex Nut
1M2.5 x 12 Socket Head Cap Screw

M3 Version

QtyDescription
1Skadis T-Nut (M3)
1M3 x 12 Socket Head Cap Screw

 

Printing

  • Material: PLA
  • Layer height: 0.2mm
  • Supports: None
  • Adhesion: None
  • Infill: 15% Grid 

 

Alternatives

This mode lwas designed to be mounted on Ikea Skadis with T-nuts. But if you prefer other mounting methods, here are some alternatives:

Tagi