creality k1/k1max side fan grill/Blower fan 120X32MM
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
side fan grill to cover the large open blades so debris doesn't enter the fan also reduces ambient noise
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 317
- Wydruki
- 3
- Wyświetlenia
- 2383
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Updated:
Now including a version to use pc fan screws to attach the grill to the side fans screws are 5x8 self cutting fan screws
Description: The Creality K1/K1MAX side fan grill is a meticulously designed component featuring a fine fin structure that effectively minimizes operational noise while maintaining optimal open area for efficient airflow. This model is ideally suited for printing in ASA or ABS materials, and a dedicated configuration file for Creality prints with the recommended settings for ASA is provided for seamless printing.
Printing Instructions: Achieving a flawless first layer is paramount for the successful production of this model. To ensure premium print quality, it is advised to heat soak the chamber by preheating the bed to 100°C and allowing the printer to stand idle for an hour before proceeding. Prior to printing, meticulous bed levelling is essential, and a flat bed is recommended for optimal results.
Bed Preparation: Applying a generous layer of glue stick on the bed is recommended to facilitate adhesion. Monitoring the initial layer closely during printing is imperative to verify the precise deposition of each line. The fine first layer line width of 0.3mm allows for intricate detailing with a 0.4mm nozzle, although minor inconsistencies may arise in solid infill areas. Notably, any such inconsistencies are inconsequential as this side of the component will be positioned facing the fan and will remain concealed from view.
Assembly: Use 3 m3 x 5.7 heat set inserts and set them into the 3 holes in the fan then use 3 m3x8 screws to fix the fan grill onto the fan.
