1 / 9
Raised Floor Segment for Sterilite Blue 54Qt Gasket Dry Box — zdjęcie 1
1 / 9

Raised Floor Segment for Sterilite Blue 54Qt Gasket Dry Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Raised Floor Segment for Sterilite Blue 54Qt Gasket Dry Box. Combine with M3 hardware to organize filament.

Ocena
0 / 5
Polubienia
5
Pobrania
40
Wydruki
0
Wyświetlenia
366
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

I wanted to spread my silica gel desiccant beads evenly on the bottom of my dry box for maximum surface area, but hated crunching my filament spools directly into it and having little orange beads get pulled out from time to time. This is a raised floor segment made specifically for the Sterilite Blue 54Qt Gasket Dry Box, though it may fit other containers with similar measurements. 

Each segment will hold 2 filament spools, and supports spools of varying widths. 12mm clearance from the bottom of the floor plate to the bottom of the feet. The extra holes are for weight/filament waste reduction. 

Printing Notes:

  • No supports needed
  • 4x need to be printed to fill out the bottom of the Sterilite 54qt container
  • ~60g filament needed and ~2 hours per segment depending on settings
  • Mating holes fit M3 heat set inserts and M3x12mm screws

Tagi