Soap Corner Tray with Drainage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soap Tray (2 sizes) for corner shower shelf. Drains liquid into the shower to keep soap dry between uses.
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 230
- Wydruki
- 1
- Wyświetlenia
- 940
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Update January 15, 2024:
As suggested by @JamaicanLumb_1661773, it's a great idea to attach self-adhesive rubber bumper pads to the bottom of the Soap Corner Tray (or any other flat-bottomed object that you print) if you want to help keep it in place and/or you want some air circulation below when it's used in a wet location!
I've added a couple photos showing some of these rubber bumper pads on a Soap Corner Tray.
Soap Tray (in two sizes) for shower shelf is intended to be placed on a corner shelf of your shower. The corner of the shower can be a sharp corner or a rounded corner - as is common with fiberglass shower inserts. Drains liquid back into the shower to keep soap dry between uses.
The provided STL files are intended to be printed in PETG or TPU (FLEX) and don't require supports.
PrusaSlicer 3MF files are provided for generic PETG and generic TPU, and G-code files are provided for the Original Prusa MK4 using Input Shaper.
The Soap Trays seen in the photos were printed on an Original Prusa MK4 with White Sunlu PETG (normal size soap tray) and with Giantarm Transparent TPU (smaller soap tray) with a 0.4mm nozzle using Input Shaper at 0.2mm SPEED layer height with 10% Gyroid infill.
Be sure to check out my other bathroom accessory designs - including holders for toothbrushes, razors, Q-tips, dental picks, and more - on Printables at https://www.printables.com/@PhilCaruso_661446/models