1 / 2
Wall mount shelf for cable modem (Sagemcom WiFi Hub C2 - F@ST 3890V3 CHWU) — zdjęcie 1
1 / 2

Wall mount shelf for cable modem (Sagemcom WiFi Hub C2 - F@ST 3890V3 CHWU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

5,04 € – 6,16 € netto (bez VAT)

Dla pliku: WallMount_0.6n_0.35mm_PLA_MK3S_4h13m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 5,60 € netto (środek widełek).

Masa podana przez autora
99 g
Czas druku podany przez autora
4,22 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Wall mount shelf that fits a cable modem/router/wifi access point "Sagemcom WiFi Hub C2 - F@ST 3890V3 CHWU"

Ocena
0 / 5
Polubienia
15
Pobrania
134
Wydruki
0
Wyświetlenia
993
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Wall mount shelf that fits a cable modem "Sagemcom WiFi Hub C2 - F@ST 3890V3 CHWU"

The supports below the shelf doubles as convenient points to tie the cables to.

The hexagonal holes in the shelf are for ventilation, as the modem has intakes on the bottom. The areas that lack holes are where the rubber feet of the modem goes. Also the holes save (some) plastic.

Screw holes were placed like they were since I already had screwholes from a previous modem (that had built in mounting holes).

  • Modelled with OnShape
  • Printed in PLA.
  • Meant to be printed as in the 3mf project (which is different than the STEP model orientation).
  • Does require (organic) supports for a tiny part of the model.

Original OnShape model: https://cad.onshape.com/documents/4ac58ba55b4b2868c840c6fd/w/ed9a8f8db7695050b12b6c0f/e/c0dfeefbc3489f56adcb4e06

Tagi