1 / 3
Ender 3 - High Airflow Hotend [5015 & 4020 fans] with BL touch! — zdjęcie 1
1 / 3

Ender 3 - High Airflow Hotend [5015 & 4020 fans] with BL touch!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lightweight, Easy to Print, High Airflow! Now with BL touch!

Ocena
0 / 5
Polubienia
2
Pobrania
24
Wydruki
0
Wyświetlenia
440
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Information:

Ender 3 hotend. High airflow over heatsink. ONLY tested with “standard” ender 3. Works with any 40 mm fan and compatable with 5015 centrifugual fan. 

Required hardware:

  • 6pc M4 bolts and nuts. Lengt depends on your fan. I used 25mm.
  • Hot glue for part cooling fan air duct!
  • 1 Zip tie.
  • 1 M3 bolt - 10mm

Print settings:

  • Due to threads, print with low layerhight!
  • Use supports for “part cooling duct”. 
  • I used PLA with high infill.

Tagi