Hinge Cap (Cover) for Dr Hahn KT-EN, KT-N 6R, KT-V 6R, KT-SN, KT-SV, and KT-B 6R - OpenJSCAD model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dr Hahn doesn't sell hinge caps. So, I made a replacement part.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v3.0
I made the model using OpenJSCAD. The outer diameter is 25 mm, the inner diameter is 23 mm, the internal slot is 20.2 mm by 15 mm, and the overhangs are 0.5 mm from all sides.
The cap covers the top of the hinge.
It should be compatible with Dr Hahn KT-EN, KT-N 6R, KT-V 6R, KT-SN, KT-SV, and KT-B 6R. All of them are structurally similar.
PLA isn't perfect for using the cap outdoors, and PETG is a better option because you need UV resistance and you need to tolerate a wide temperature range.
const jscad = require('@jscad/modeling')
const { cuboid, cylinder, roundedCylinder } = jscad.primitives
const { subtract, union, intersect} = jscad.booleans;
const { translate } = require('@jscad/modeling').transformsconst figureEmptyCylinder = ({diameterInternal, diameterExternal, height, center = [0, 0, 0], roundRadius = 0.5, segments = 128}) => {
let c0 = roundedCylinder({radius: diameterExternal / 2 , height: height, center, segments, roundRadius});
let c1 = cylinder({radius: diameterInternal / 2, height, center, segments});
return subtract(c0, c1);
}
const figureBarrel = ({diameterInternal, diameterExternal, height, center = [0, 0, 0], segments = 32, bottomHeight = 1, roundRadius = 0}) => {
if (height === undefined) {
throw "Undefined height";
}
let centerNew = [center[0], center[1], center[2] - height / 2.0 + bottomHeight / 2.0];
return union(
figureEmptyCylinder({diameterInternal, diameterExternal, height, center, segments}),
cylinder({radius: diameterExternal / 2.0, height: bottomHeight, center: centerNew, segments})
)
}
const figureSlot = ({diameterExternal, thickness, height, segments = 32}) => {
return emptyCilnderHalf({l1: diameterExternal[1], l2: diameterExternal[0], thickness: 1, height: height, segments});
}
const figurePlaceholder = ({radius, width, height, thicknessSlot = 1.0, thicknessExternal = 2.0, thicknessExtra = 0.3, heightInternal = 7, heightExternal = 3, heightOuterDiameter = 1.0, segments = 32}) => {
const outerDiameter = [width + 2 * thicknessExtra, height + 2 * thicknessExtra];
const slotInternal = translate(
[0, 0, heightInternal / 2],
figureSlot({
diameterExternal: [width, height],
height: heightInternal,
thickness: thicknessSlot,
segments: segments
})
);
const slowInternalExtraUp = translate(
[0, 0, heightInternal - 0.5],
figureSlot({diameterExternal: outerDiameter, height: 0.5, thickness: 0.5, segments})
);
const slowInternalExtraDown = translate(
[0, 0, heightInternal - 1.5],
figureSlot({diameterExternal: outerDiameter, height: 0.5, thickness: 0.5, segments})
);
const outerCircle = translate(
[0, 0, heightExternal / 2],
figureBarrel({
diameterInternal: radius - 2 * thicknessExternal,
diameterExternal: radius,
height: heightExternal,
segments: segments
})
);
return union(
slotInternal,
slowInternalExtraUp,
slowInternalExtraDown,
outerCircle,
);
}
const emptyCilnderHalf = ({l1, l2, thickness, height, segments = 32}) => {
let o = l2 - l1;
let cUp = subtract(
subtract(
cylinder({radius: l1 / 2, height, center: [0, o / 2, 0], segments}),
cylinder({radius: l1 / 2 - thickness, height, center: [0, o / 2, 0], segments})
),
cuboid({size: [l1, l1, height], center: [0, -l1 / 2.0 + o / 2, 0]})
);
let cDown = subtract(
subtract(
cylinder({radius: l1 / 2, height, center: [0, -o/2, 0], segments}),
cylinder({radius: l1 / 2 - thickness, height, center: [0, -o/2, 0], segments})
),
cuboid({size: [l1, l1, height], center: [0, l1 / 2.0 - o/2, 0], segments})
);
return translate([0, 0, 0], union(
cUp,
cDown,
cuboid({size: [thickness, o, height], "center": [(-l1 + thickness) / 2, 0, 0], segments}),
cuboid({size: [thickness, o, height], "center": [(l1 - thickness) / 2, 0, 0], segments})
));
};
function main() {
return figurePlaceholder({
"radius": 25,
"width": 20.2,
"height": 15,
"segments": 32
})
}
module.exports = { main }
